Cheap-n-Cheer Tap Head for filling bottles and growlers

Things to remember:

• To avoid foaming, make sure everything is cold: the beer, tap, adapter, tubing, and bottles. So, pre-chill them beforehand.
• You can tighten the adapter nut to the tap's nozzle very tight, but not so much that it strips. Sealing is accomplished by a silicone O-ring. So, it can hold pressure up to 2-3 psi.
• Remember to turn the silicone tubing while pushing it into the push-to-connect fitting.
• Adjust the head space pressure to get good balance between flow speed and foaming.
• Over-fill until foam oozing out the top and then cap to minimize air in the bottle.
• Rinse & sanitize the adapter nut and the tubing right afterward.
• Since you can fill with finished beer easily, you should fill a few bottles to take to a party instead of a growler or mini keg. 

-Trong